Car Fixed
GarageProLogin
2009
toyota camry22 views

Rough Idle or Engine Misfire

Expert diagnosis and repair solutions for 2009 toyota camry Rough Idle or Engine Misfire. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$150-$300
Inspect and replace faulty spark plugs and ignition coils to resolve rough idle and misfire issues.
Source: https://repairpal.com/toyota/camry/2009/rough-idle

Repair Steps:

  1. Identify the misfiring cylinder using a diagnostic tool.
  2. Remove the ignition coil and spark plug from the affected cylinder.
  3. Install new spark plug and ignition coil.
  4. Clear any diagnostic trouble codes and test drive the vehicle to confirm the fix.
2
easy$20-$50
Clean the throttle body to remove carbon buildup that may cause rough idle.
Source: https://www.youtube.com/watch?v=wY9X8cSZqbc

Repair Steps:

  1. Disconnect the battery to ensure safety.
  2. Remove the air intake hose from the throttle body.
  3. Use a throttle body cleaner spray to clean the inside of the throttle body.
  4. Reassemble the air intake hose and reconnect the battery.
  5. Start the engine and let it idle to ensure smooth operation.
3
medium$50-$200
Check for vacuum leaks which can cause rough idle and repair any found leaks.
Source: https://repairpal.com/toyota/camry/2009/rough-idle

Repair Steps:

  1. Use a smoke machine to detect any vacuum leaks in the intake system.
  2. Inspect hoses and connections for cracks or disconnections.
  3. Replace or repair any damaged hoses or components.
  4. Re-test the system to ensure all leaks are fixed.
4
medium$100-$200
Perform a fuel injector cleaning to address potential clogging issues causing misfire.
Source: https://www.justanswer.com/toyota/9hqfc-2009-camry-shaking-problems-idle.html

Repair Steps:

  1. Add a fuel injector cleaner to the gas tank.
  2. Run the engine to allow the cleaner to circulate through the system.
  3. Consider professional cleaning if the issue persists after using the additive.
5
easy$0
Recalibrate the idle by allowing the vehicle to idle and retrain the computer after battery disconnection.
Source: https://www.youtube.com/watch?v=8Yd9gLPq2ow

Repair Steps:

  1. Disconnect the battery to reset the ECU.
  2. Reconnect the battery and start the engine.
  3. Let the engine idle for a few minutes to allow the ECU to relearn the idle settings.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems