Car Fixed
GarageProLogin
2019
ram 150020 views

Transmission Slipping or Hard Shifting

Expert diagnosis and repair solutions for 2019 ram 1500 Transmission Slipping or Hard Shifting. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$0-$50 (if using a DIY tool like AlfaOBD)
Reset the transmission adaptations using AlfaOBD or a similar tool to clear any incorrect learning by the transmission control module.
Source: https://5thgenrams.com/community/threads/transmission-problems-2019-ram-limited.53101/

Repair Steps:

  1. Purchase or download the AlfaOBD app for your device.
  2. Connect the app to your vehicle using a compatible OBD-II adapter.
  3. Navigate to the transmission settings and select 'Reset Adaptations'.
  4. Follow the on-screen instructions to complete the reset process.
2
medium$100-$200 (dealer service)
Update the Transmission Control Module (TCM) software to the latest version to address known shifting issues.
Source: https://static.nhtsa.gov/odi/tsbs/2020/MC-10173369-9999.pdf

Repair Steps:

  1. Schedule an appointment with a certified Ram dealer.
  2. Request a TCM software update as per TSB 21-009-21.
  3. The dealer will connect the vehicle to their diagnostic system and update the TCM software.
  4. Test drive the vehicle to ensure the issue is resolved.
3
easy$150-$250
Check and replace the transmission fluid if it is found to be degraded or at incorrect levels.
Source: https://newparts.com/blog/most-common-ram-1500-transmission-issues

Repair Steps:

  1. Lift the vehicle and secure it on jack stands.
  2. Locate the transmission fluid pan and drain the old fluid.
  3. Replace the transmission fluid filter if necessary.
  4. Refill the transmission with the manufacturer-recommended fluid to the correct level.
  5. Check for leaks and test drive the vehicle.
4
medium$200-$400
Inspect and replace any faulty transmission sensors that may be causing erratic shifting.
Source: https://lemonlawexperts.com/dodge-ram-1500-transmission-problems/

Repair Steps:

  1. Use a diagnostic tool to identify any error codes related to the transmission sensors.
  2. Locate the faulty sensor as indicated by the diagnostic tool.
  3. Disconnect the old sensor and replace it with a new, OEM-approved sensor.
  4. Clear any error codes and test drive the vehicle to confirm the repair.
5
easy$0
Perform a manual reset of the transmission by disconnecting the battery to clear any temporary faults.
Source: https://www.youtube.com/watch?v=m1X5SBL8Ye8

Repair Steps:

  1. Turn off the vehicle and open the hood.
  2. Disconnect the negative battery terminal and wait for 15 minutes.
  3. Reconnect the battery terminal and start the vehicle.
  4. Allow the vehicle to idle for a few minutes to relearn the idle settings.
  5. Test drive the vehicle to ensure the transmission shifts smoothly.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems