Car Fixed
GarageProLogin
2011
ram 150017 views

Rough Idle or Engine Misfire

Expert diagnosis and repair solutions for 2011 Ram 1500 Rough Idle or Engine Misfire. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$150-$300
Replace faulty spark plugs and ignition coils, which are common causes of misfires in the 2011 Ram 1500.
Source: https://repairpal.com/ram/1500/2011/rough-idle

Repair Steps:

  1. Purchase new spark plugs and ignition coils compatible with the 2011 Ram 1500.
  2. Disconnect the battery to ensure safety.
  3. Remove the engine cover to access the ignition coils.
  4. Unplug the electrical connectors from the ignition coils.
  5. Remove the bolts securing the ignition coils and take them out.
  6. Remove the old spark plugs using a spark plug socket.
  7. Install new spark plugs and torque them to the manufacturer's specifications.
  8. Reinstall the ignition coils and secure them with bolts.
  9. Reconnect the electrical connectors and battery.
2
medium$50-$150
Inspect and repair any vacuum leaks that could be causing rough idle or misfire.
Source: https://www.manahawkinchryslerdodge.net/how-to-fix-a-misfiring-ram-engine

Repair Steps:

  1. Start the engine and listen for hissing sounds indicating a vacuum leak.
  2. Use a smoke machine or spray soapy water around vacuum hoses and intake manifold to detect leaks.
  3. Identify any damaged or disconnected hoses.
  4. Replace or reconnect any faulty vacuum hoses.
  5. Test the engine again to ensure the idle is smooth and the misfire is resolved.
3
easyFree at dealership under recall
Perform a software update on the Powertrain Control Module (PCM) to address potential misfire issues.
Source: https://static.nhtsa.gov/odi/tsbs/2025/MC-11013168-0001.pdf

Repair Steps:

  1. Contact a Chrysler dealership to schedule a service appointment.
  2. Inform the service advisor about the rough idle and misfire issue.
  3. Request a PCM software update as per the relevant Technical Service Bulletin.
  4. Allow the dealership to perform the software update.
  5. Test drive the vehicle to confirm the issue is resolved.
4
hard$300-$600
Inspect and replace any faulty fuel injectors that might be causing misfires.
Source: https://www.justanswer.com/dodge/klrek-2011-ram-1500-misfire-cylinder-so.html

Repair Steps:

  1. Purchase new fuel injectors compatible with the 2011 Ram 1500.
  2. Disconnect the battery and relieve fuel system pressure.
  3. Remove the intake manifold to access the fuel rail and injectors.
  4. Disconnect the electrical connectors and fuel lines from the injectors.
  5. Remove the fuel rail and take out the faulty injectors.
  6. Install new injectors and ensure they are properly seated.
  7. Reinstall the fuel rail, intake manifold, and reconnect all connectors.
  8. Reconnect the battery and test the engine for smooth operation.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems