Car Fixed
GarageProLogin
2010
ram 150023 views

Transmission Slipping or Hard Shifting

Expert diagnosis and repair solutions for 2010 Ram 1500 Transmission Slipping or Hard Shifting. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$150-$250
Replace and refill the transmission fluid to resolve slipping and hard shifting issues.
Source: https://www.sundevilauto.com/blog/hard-shifting-slipping-or-jerking-transmissions

Repair Steps:

  1. Drain the old transmission fluid from the transmission pan.
  2. Replace the transmission filter if applicable.
  3. Refill with the recommended type and amount of transmission fluid.
  4. Test drive the vehicle to ensure proper shifting.
2
easy$100-$200
Reprogram the Powertrain Control Module (PCM) to improve transmission shifting and driveability.
Source: https://static.nhtsa.gov/odi/tsbs/2020/MC-10173369-9999.pdf

Repair Steps:

  1. Connect the vehicle to a diagnostic tool.
  2. Download the latest PCM software update from the manufacturer.
  3. Install the update to the vehicle's PCM.
  4. Verify the update by checking for improved transmission performance.
3
hard$300-$500
Inspect and replace faulty shift solenoids to address hard shifting between gears.
Source: https://www.justanswer.com/dodge/l1x2o-2017-dodge-ram-1500-5-7-hemi-acting-up.html

Repair Steps:

  1. Remove the transmission pan to access the solenoids.
  2. Test each solenoid for proper operation using a multimeter.
  3. Replace any solenoids that are not functioning correctly.
  4. Reassemble the transmission pan and refill with fluid.
4
easyFree under recall
Address the recall for the Brake Transmission Shift Interlock (BTSI) to prevent unintended gear shifts.
Source: https://www.nhtsa.gov/recalls

Repair Steps:

  1. Contact a local Chrysler dealer to schedule a recall service.
  2. Bring the vehicle to the dealer for inspection and software update.
  3. Have the BTSI inspected and replaced if necessary.
  4. Ensure the recall work is documented and verified by the dealer.
5
mediumFree under recall
Install a pinion nut retainer to prevent rear axle lock-up due to a loose pinion nut.
Source: https://www.nhtsa.gov/recalls

Repair Steps:

  1. Schedule a service appointment with a Chrysler dealer.
  2. Have the dealer install the pinion nut retainer as per recall instructions.
  3. Verify the installation by checking for any unusual noises or handling issues.
  4. Ensure the recall service is properly documented.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems