Car Fixed
GarageProLogin
2018
honda cr-v24 views

Check Engine Light On

Expert diagnosis and repair solutions for 2018 honda cr-v Check Engine Light On. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$0 (covered under recall)
Replace the fuel pump assembly due to potential failure causing engine stalls.
Source: https://static.nhtsa.gov/odi/rcl/2021/RCRIT-21V215-8345.pdf

Repair Steps:

  1. Contact a Honda dealer to verify recall applicability.
  2. Schedule an appointment for the recall service.
  3. Dealer will replace the fuel pump assembly free of charge.
2
medium$100-$200 (if not covered under warranty)
Address engine misfires by updating the vehicle's software and checking for DTCs P0300-P0304.
Source: https://www.crvownersclub.com/threads/technical-service-bulletins.200556/

Repair Steps:

  1. Visit a Honda service center for a diagnostic scan.
  2. Update the vehicle's software to the latest version.
  3. Inspect and replace faulty spark plugs if necessary.
3
easy$10-$20
Resolve check engine light due to a loose or faulty gas cap.
Source: https://www.penskehondaindy.com/service/service-tips-and-tricks/how-to-reset-honda-check-engine-light/

Repair Steps:

  1. Inspect the gas cap for damage or looseness.
  2. Tighten the gas cap securely or replace if damaged.
  3. Reset the check engine light using an OBD-II scanner.
4
medium$50-$150
Replace the canister purge valve to fix DTC P0441 (EVAP System Purge Flow Malfunction).
Source: https://www.youtube.com/watch?v=zBSJ9z4hntM

Repair Steps:

  1. Locate the canister purge valve near the engine bay.
  2. Disconnect the electrical connector and hoses from the valve.
  3. Install the new purge valve and reconnect all components.
5
easy$5-$15 for cleaning supplies
Inspect and clean the MAF sensor to resolve air-fuel mixture issues.
Source: https://www.facebook.com/groups/979064497277937/posts/1280557257128658/

Repair Steps:

  1. Locate the MAF sensor in the intake system.
  2. Remove the sensor and clean it with MAF sensor cleaner.
  3. Reinstall the sensor and clear any error codes.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems