Car Fixed
GarageProLogin
2010
honda cr-v21 views

Check Engine Light On

Expert diagnosis and repair solutions for 2010 honda cr-v Check Engine Light On. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
hard$900-$2500
Replace the catalytic converter to resolve the P0420 code indicating 'Catalyst System Efficiency Below Threshold'.
Source: https://repairpal.com/honda/cr-v/2010/check-engine-light

Repair Steps:

  1. Diagnose the check engine light to confirm P0420 code
  2. Purchase a new catalytic converter
  3. Remove the old catalytic converter
  4. Install the new catalytic converter
  5. Clear the check engine light code
2
medium$150-$300
Check and replace the oxygen sensor if faulty, which can cause a check engine light.
Source: https://www.autonationhondarenton.com/service/check-engine-light.htm

Repair Steps:

  1. Use an OBD-II scanner to check for oxygen sensor-related codes
  2. Locate the faulty oxygen sensor
  3. Disconnect the sensor and remove it
  4. Install a new oxygen sensor
  5. Reconnect the sensor and clear the code
3
easy$10-$30
Ensure the gas cap is properly tightened or replace it if damaged to resolve check engine light issues.
Source: https://www.nalleyhonda.com/honda-crv-check-engine-light.htm

Repair Steps:

  1. Inspect the gas cap for damage or looseness
  2. Tighten the gas cap securely
  3. Replace the gas cap if it is damaged
  4. Drive the vehicle to see if the check engine light turns off
4
medium$60-$150
Inspect and replace the spark plugs if they are worn or faulty, which can cause misfires and trigger the check engine light.
Source: https://www.penskehondaindy.com/service/service-tips-and-tricks/how-to-reset-honda-check-engine-light/

Repair Steps:

  1. Use an OBD-II scanner to check for misfire codes
  2. Remove the ignition coil to access the spark plugs
  3. Inspect the spark plugs for wear or damage
  4. Replace any faulty spark plugs
  5. Reinstall the ignition coil and clear the code
5
medium$100-$200
Address any vacuum leaks which can cause the check engine light to illuminate.
Source: https://repairpal.com/honda/cr-v/2010/check-engine-light

Repair Steps:

  1. Perform a visual inspection for any obvious vacuum leaks
  2. Use a smoke machine to detect hidden leaks
  3. Repair or replace any damaged vacuum hoses
  4. Clear the check engine light code

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems