Car Fixed
GarageProLogin
2007
honda civic22 views

Rough Idle or Engine Misfire

Expert diagnosis and repair solutions for 2007 honda civic Rough Idle or Engine Misfire. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$150-$300
Replace faulty ignition coils to address engine misfire and rough idle.
Source: https://repairpal.com/honda/civic/2007/rough-idle

Repair Steps:

  1. Identify the faulty ignition coil using a diagnostic tool.
  2. Disconnect the battery to ensure safety.
  3. Remove the engine cover to access the ignition coils.
  4. Disconnect the electrical connector and remove the faulty ignition coil.
  5. Install the new ignition coil and reconnect the electrical connector.
  6. Reattach the engine cover and reconnect the battery.
2
easy$60-$120
Replace worn or damaged spark plugs to improve engine idle and performance.
Source: https://www.facebook.com/groups/talkbedford/posts/2331503147206554/

Repair Steps:

  1. Allow the engine to cool down before starting the repair.
  2. Remove the engine cover to access the spark plugs.
  3. Use a spark plug socket to remove the old spark plugs.
  4. Check the gap on the new spark plugs and adjust if necessary.
  5. Install the new spark plugs and tighten them to the manufacturer's specifications.
  6. Reattach the engine cover.
3
medium$100-$200
Inspect and repair any vacuum leaks that may be causing rough idle.
Source: https://repairpal.com/honda/civic/2007/rough-idle

Repair Steps:

  1. Use a smoke machine or carburetor cleaner to identify vacuum leaks.
  2. Inspect hoses and connections for cracks or disconnections.
  3. Replace any damaged hoses or tighten loose connections.
  4. Recheck for leaks to ensure the issue is resolved.
4
medium$100-$200
Clean or replace the Idle Air Control (IAC) valve to stabilize idle speed.
Source: https://www.justanswer.com/honda/p9f0a-car-misfiring-couple-weeks-ago-idle-car.html

Repair Steps:

  1. Locate the IAC valve on the throttle body.
  2. Disconnect the electrical connector and remove the IAC valve.
  3. Clean the valve using a throttle body cleaner.
  4. Reinstall the cleaned or new IAC valve and reconnect the electrical connector.
  5. Start the engine and check for improved idle.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems