Car Fixed
GarageProLogin
2015
ford f-15026 views

Rough Idle or Engine Misfire

Expert diagnosis and repair solutions for 2015 Ford F-150 Rough Idle or Engine Misfire. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$200-$400
Replace spark plugs and ignition coils to address misfire and rough idle issues.
Source: https://www.f150ecoboost.net/threads/2015-f150-3-5-l-rough-idle-and-after-stopping.83463/

Repair Steps:

  1. Purchase new spark plugs and ignition coils
  2. Remove the engine cover to access the ignition system
  3. Replace each spark plug and ignition coil one at a time
  4. Ensure all connections are secure and reassemble the engine cover
2
medium$100-$250
Inspect and repair vacuum leaks, particularly around the EVAP Purge Valve.
Source: https://www.f150forum.com/f118/rough-idle-no-codes-showing-507603/

Repair Steps:

  1. Perform a visual inspection of the vacuum lines for cracks or disconnections
  2. Use a smoke machine to detect leaks in the EVAP system
  3. Replace or repair any damaged vacuum hoses
  4. Test the vehicle to ensure the rough idle is resolved
3
easy$50-$150
Replace the crankshaft position sensor to resolve misfire codes such as P0316.
Source: https://www.justanswer.com/ford/n78d8-misfire-1-8-random-p0316-ford-f-150-rough-idle-seems.html

Repair Steps:

  1. Locate the crankshaft position sensor near the engine block
  2. Disconnect the electrical connector from the sensor
  3. Remove the sensor mounting bolt and extract the sensor
  4. Install the new sensor and reconnect the electrical connector
  5. Clear any diagnostic trouble codes and test the vehicle
4
easy$20-$50
Clean the throttle body and MAF sensor to improve idle stability.
Source: https://www.youtube.com/watch?v=kJtattyUKJ4

Repair Steps:

  1. Disconnect the battery to prevent electrical issues
  2. Remove the air intake hose to access the throttle body
  3. Use a throttle body cleaner to remove carbon deposits
  4. Clean the MAF sensor with a specialized cleaner
  5. Reassemble the intake components and reconnect the battery
5
easyFree (covered by recall)
Address engine block heater recall to prevent potential engine issues.
Source: Recall Campaign 18V894000

Repair Steps:

  1. Contact a Ford dealer to verify recall status
  2. Schedule an appointment for recall service
  3. Have the dealer disable the block heater cable
  4. Once parts are available, have the dealer replace the engine block heater cable

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems