Car Fixed
GarageProLogin
2010
ford f-15023 views

Rough Idle or Engine Misfire

Expert diagnosis and repair solutions for 2010 Ford F-150 Rough Idle or Engine Misfire. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$200-$400
Replace faulty ignition coils and spark plugs to address misfire and rough idle issues.
Source: https://www.justanswer.com/ford/jb1yo-issue-2010-f150-5-4lt.html

Repair Steps:

  1. Purchase new ignition coils and spark plugs for the 2010 Ford F-150.
  2. Disconnect the battery to ensure safety.
  3. Remove the engine cover to access the ignition coils.
  4. Unplug the electrical connector from each ignition coil.
  5. Remove the bolts securing the ignition coils and replace them with new ones.
  6. Remove the old spark plugs using a spark plug socket and replace them with new ones.
  7. Reassemble all components and reconnect the battery.
2
medium$50-$150
Inspect and repair vacuum leaks that may cause rough idle.
Source: https://www.ford-trucks.com/forums/1552798-2010-f-150-5-4l-misfiring-and-idling-poorly-hesitates-to-start.html

Repair Steps:

  1. Use a smoke machine or spray carb cleaner around the intake manifold and vacuum hoses to detect leaks.
  2. Listen for changes in engine idle speed or observe smoke to identify leak locations.
  3. Replace any damaged hoses or gaskets where leaks are detected.
  4. Re-test for leaks to ensure the issue is resolved.
3
easy$50-$100
Clean or replace the throttle body and Idle Air Control (IAC) valve to improve idle quality.
Source: https://www.justanswer.com/ford/jb1yo-issue-2010-f150-5-4lt.html

Repair Steps:

  1. Disconnect the battery to prevent electrical issues.
  2. Remove the air intake duct to access the throttle body.
  3. Use throttle body cleaner to remove carbon buildup from the throttle plate and housing.
  4. Remove the IAC valve and clean it with appropriate cleaner.
  5. Reinstall the IAC valve and throttle body components.
  6. Reconnect the battery and test the engine for improved idle.
4
hard$500-$1500
Replace clogged catalytic converters that may cause back pressure and misfires.
Source: https://www.youtube.com/watch?v=vE9sCZLaKko

Repair Steps:

  1. Raise the vehicle and secure it on jack stands.
  2. Locate the catalytic converters along the exhaust system.
  3. Unbolt the catalytic converters from the exhaust manifold and exhaust pipe.
  4. Install new catalytic converters and secure them with bolts.
  5. Lower the vehicle and test for improved engine performance.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems