Car Fixed
GarageProLogin
2013
ford escape23 views

Check Engine Light On

Expert diagnosis and repair solutions for 2013 ford escape Check Engine Light On. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$150-$300
Replace the oxygen sensor to resolve check engine light issues related to emissions.
Source: https://repairpal.com/ford/escape/2013/check-engine-light

Repair Steps:

  1. Purchase a compatible oxygen sensor for the 2013 Ford Escape
  2. Locate the faulty sensor, typically near the exhaust manifold
  3. Disconnect the old sensor and install the new one
  4. Clear the check engine light using an OBD-II scanner
2
easy$10-$20
Inspect and tighten or replace the gas cap to resolve minor check engine light issues.
Source: https://lhmforddraper.com/ford-escape-check-engine-light.htm

Repair Steps:

  1. Check the gas cap for any visible damage or looseness
  2. Tighten the gas cap securely
  3. If damaged, replace with a new gas cap
  4. Drive the vehicle to see if the check engine light turns off
3
hardFree under recall
Address wiring issues related to the MAP sensor as per recall 14V495000.
Source: https://static.nhtsa.gov/odi/tsbs/2016/SB-10075282-5448.pdf

Repair Steps:

  1. Contact a Ford dealer to verify if the vehicle is affected by recall 14V495000
  2. Schedule an appointment for recall service
  3. Dealers will replace the crimped splices with new splices
  4. Verify the repair by checking for any remaining diagnostic trouble codes
4
medium$100-$200
Reprogram the PCM to address issues with the coolant bypass solenoid as per TSB 16-0052.
Source: https://static.nhtsa.gov/odi/tsbs/2016/SB-10075282-5448.pdf

Repair Steps:

  1. Use a Ford Integrated Diagnostic System (IDS) to retrieve DTCs
  2. If DTC P26B7 is present, replace the coolant bypass valve
  3. Reprogram the PCM to the latest calibration
  4. Test drive the vehicle to ensure the issue is resolved
5
hardFree under recall
Inspect and replace the engine compartment fuel line if necessary, as per recall 12V336000.
Source: https://static.nhtsa.gov/odi/tsbs/2016/SB-10075282-5448.pdf

Repair Steps:

  1. Contact a Ford dealer to confirm recall eligibility
  2. Arrange for vehicle pick-up and rental car if needed
  3. Dealer will replace the engine compartment fuel line
  4. Ensure the repair is documented and the check engine light is cleared

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems