Car Fixed
GarageProLogin
2007
chevrolet silverado23 views

Rough Idle or Engine Misfire

Expert diagnosis and repair solutions for 2007 chevrolet silverado Rough Idle or Engine Misfire. Get step-by-step fixes, cost estimates, and professional advice.

Expert Repair Solutions

1
medium$100-$200 per coil
Replace faulty ignition coils to resolve misfire issues, particularly if specific cylinders are identified with misfire codes.
Source: https://www.silveradosierra.com/threads/p0300-random-multiple-cylinder-misfire-detected-and-rough-idle.756710/

Repair Steps:

  1. Identify the misfiring cylinder using an OBD-II scanner.
  2. Remove the ignition coil from the misfiring cylinder.
  3. Install a new ignition coil and reconnect the electrical connector.
  4. Clear any diagnostic trouble codes and test drive the vehicle to confirm the fix.
2
medium$50-$150 for parts and labor
Inspect and repair any vacuum leaks that may be causing rough idle or misfire conditions.
Source: https://www.silveradosierra.com/threads/chasing-an-occasional-rough-idle.712333/

Repair Steps:

  1. Perform a visual inspection of vacuum hoses for cracks or disconnections.
  2. Use a smoke machine to detect hidden vacuum leaks.
  3. Replace or repair any damaged vacuum hoses.
  4. Recheck engine performance and ensure idle stability.
3
hard$200-$500 depending on injector condition
Clean or replace clogged fuel injectors to improve fuel delivery and resolve misfire issues.
Source: https://www.justanswer.com/chevy/hy1qs-2007-chevy-silverado-misfire-cylinder-idle.html

Repair Steps:

  1. Remove the fuel rail and injectors from the engine.
  2. Clean the injectors using a professional-grade injector cleaning kit.
  3. Test the injectors for proper spray pattern and flow rate.
  4. Reinstall the injectors and fuel rail, ensuring all connections are secure.
  5. Perform a test drive to verify the repair.
4
medium$100-$300 for diagnostics and repairs
Address potential electrical issues by checking connections within the engine wiring harness.
Source: Bulletin 08-06-03-007

Repair Steps:

  1. Inspect the engine wiring harness for loose or corroded connections.
  2. Repair or replace any damaged connectors or wiring.
  3. Ensure all connections are secure and free of corrosion.
  4. Clear any stored diagnostic codes and verify the repair with a test drive.

Get a Personalized Diagnosis

Get AI-powered repair suggestions specific to your vehicle's symptoms and history.

Start Free Diagnosis →
Browse more common problems